Applicable Standards - ABB IRC5 Compact Product Manual

6 Reference information

6.2 Applicable standards

6.2 Applicable standards
General
The product is designed in accordance with EN ISO 10218-1, Robots for industrial
environments - Safety requirements -Part 1 Robot. If there are deviations, these
are listed in the declaration of incorporation which is included on delivery.
Standards, EN ISO
The product is designed in accordance with selected parts of:
Standard
EN ISO 12100:2010
EN ISO 13849-1:2015
EN ISO 13850:2015
ISO 9787:2013
ISO 9283:1998
EN ISO 14644-1:2015
EN ISO 13732-1:2008
EN 61000-6-4:2007 +
A1:2011
IEC 61000-6-4:2006 +
A1:2010
(option 129-1)
EN 61000-6-2:2005
IEC 61000-6-2:2005
EN IEC 60974-1:2012
EN IEC 60974-10:2014
EN IEC 60204-1:2016
IEC 60529:1989 + A2:2013
i
ii
Continues on next page
206
Note
The listed standards are valid at the time of the release of this document. Phased
out or replaced standards are removed from the list when needed.
i
ii
ii
Only robots with protection Clean Room.
Only valid for arc welding robots. Replaces EN IEC 61000-6-4 for arc welding robots.
© Copyright 2009-2020 ABB. All rights reserved.
Description
Safety of machinery - General principles for design - Risk as-
sessment and risk reduction
Safety of machinery, safety related parts of control systems -
Part 1: General principles for design
Safety of machinery - Emergency stop - Principles for design
Robots and robotic devices -- Coordinate systems and motion
nomenclatures
Manipulating industrial robots, performance criteria, and related
test methods
Classification of air cleanliness
Ergonomics of the thermal environment - Part 1
EMC, Generic emission
EMC, Generic immunity
Arc welding equipment - Part 1: Welding power sources
Arc welding equipment - Part 10: EMC requirements
Safety of machinery - Electrical equipment of machines - Part
1 General requirements
Degrees of protection provided by enclosures (IP code)
Product manual - IRC5 Compact
3HAC047138-001 Revision: M