2-11 Belt Installation Cont...
Proper Tension:
1" Of Deflection for 10-10lbs of Pressure Applied
To Center of belt
Figure 2-11c
Figure 2-11d
Tension Adjustment Knob
2-12 Pulley Guard Installation
Place the PTO pulley guard P#(A1751) over the deck
pulley while inserting the tab into the slot on the deck
drive assembly. Figure 2-12a and 2-12b.
Mount the Pulley Guard Clamp. It is used to hold the
pulley guard in place. Align the hole in the pulley guard
clamp P#(B0586) with the bolt on the engine pulley
guard. Pulley guard clamp should be placed to the
outside of the mower deck U-bolt. Figure 2-12c thru
2-12e.
Figure 2-12a
Figure 2-12b
Mower Deck U-bolt
Figure 2-12c
11
Pulley Guard Tab
Deck Drive Assembly Slot
Pulley Guard Flange
Engine Pulley Guard
Mower Deck U-bolt