Charging - Huawei 3 Series Manual

Charging

Charging
1
Connect the charging cradle to a power adapter and then connect the power adapter to a
power supply.
2
Rest your watch on top of the charging cradle and align the metal contacts on your watch
to those of the charging cradle until a charging icon appears on the watch screen.
3
After the watch is fully charged, the charging indicator will display 100%. When your
watch is fully charged, it will automatically stop charging.
You are advised to use a Huawei power adapter, a USB port of a computer, or a non-
•
Huawei power adapter that complies with corresponding regional or national laws and
regulations as well as regional and international safety standards to charge your
watch. Other chargers and power banks that do not meet corresponding safety
standards may cause issues such as slow charging and overheating. Exercise caution
when using them. It is recommended that you purchase a Huawei power adapter from
an official Huawei sales outlet.
Keep the charging port dry and clean to prevent short circuits or other risks.
•
When wireless charging is used for your watch, use the dedicated charging cradle and
•
make sure that the watch coil is aligned with that of the charging cradle. If a non-
dedicated charging cradle is used and the watch coil is not aligned with that of the
charging cradle, the charging efficiency will deteriorate and issues such as overheating
will occur.
can be charged by Huawei phones that support reverse wireless charging.
•
The charging cradle tends to attract metal objects due to it being magnetic. Therefore,
•
it is necessary to check and clean the charging cradle before use. Do not expose the
charging cradle to high temperatures for a long time, as this may cause the charging
cradle to demagnetize or cause other exceptions.
Charging time
It takes about 120 minutes to fully charge the battery. Disconnect the device from the power
supply once it is fully charged.
Getting started
9