Charging - Huawei WATCH GT 3 SE User Manual

Bluetooth connection status
Disconnected from the
phone's Bluetooth and the
Huawei Health app

Charging

Charging your watch
1
Connect the charging cradle and power adapter via the charging cable, and then connect
the power adapter to a power supply.
2
Rest your device on top of the charging cradle, and align the metal contacts on your
device to those of the charging cradle until a charging icon appears on the device screen.
3
Remove the device and disconnect the power adapter after the device is fully charged and
the charging icon displays 100%.
You are advised to use a Huawei charger or a non-Huawei charger that complies with
•
corresponding regional or national laws and regulations as well as regional and
international safety standards to charge your device. Other chargers and power banks
that do not meet corresponding safety standards may cause issues such as slow
charging and overheating. Exercise caution when using them. It is recommended that
you purchase a Huawei power adapter from an official Huawei sales outlet.
Keep the charging port dry and clean to prevent short circuits or other risks.
•
The charging cradle tends to attract metal objects due to it being magnetic. Therefore,
•
it is necessary to check and clean the charging cradle before use. Do not expose the
charging cradle to high temperatures for a long time, as this may cause the charging
cradle to demagnetize or cause other exceptions.
If the device is not used for a long time, it is recommended that you charge the battery
•
once every two to three months, to extend the battery lifespan.
Checking the battery level
Method 1: Swipe down from the top of the home screen to check the battery level.
Connected to the phone's
Bluetooth and the Huawei
Health app
Getting Started
Connected to the phone's
Bluetooth but disconnected
from the Huawei Health app
5