Nokia NHM-1 Series Software Instructions page 85

NHM-1
CCS Technical Documentation
• Algorithm mode:
Uplink power level ( open loop power ), ( -57 ... +21 dBm )
Step size (in dB's + or - ) and step counts for power sweeps.
Sequence is for how many sweeps wanted
Step duration is the length of the step in us (max 2550 us )
Uplink scrambling code and type can be selected here
Here the uplink data- and control channelization code
numbers and weighting can be adjusted ( 0...15 ). Code
classes for those define the bit rates ( spreading factors ).
e.g. DPDCH code class 6 stands for spreading factor 60 and
8 in DPCCH is for SF 256. These SF's are used in 12.2.kpbs
uplink voice channel.
Uplink channel number can be changed in here ( 9612 ...
9888 ).
NOTE: When settings are done, they're enabled after
pressing "Send". If settings are then changed ( e.g. new
channel number ) you must press "Stop" and "Send" again.
Copyright Nokia. All rights reserved..
Issue 1 11/03 Page 85