Manual Settings; A) For Fls-4S Pos Flash Device Choose Following Connection Settings; B) For Fps-8 Flash Prommer Choose Following Connection Settings - Nokia NHM-1 Series Software Instructions

CCS Technical Documentation

Manual Settings

A) For FLS-4S POS Flash Device choose following connection settings:

Media: FBUS
COM Port: Virtual COM Port used by FLS-4S. Please check this always!
(To check please go to Windows / Control Panel / FLS Virtual Port / Configuration)
(To check please go to Windows / Control Panel / FLS Virtual Port / Configuration)

B) For FPS-8 Flash Prommer choose following connection settings:

Media: FPS-8
Port Num: COM Port where FPS-8 is connected
COMBOX_DEF_MEDIA: FBUS
Choose "Finish" to complete.
If you use the Wizard, connect the tools and a phone to your PC and the wizard will
automatically try to configure the correct connection.
Issue 1 11/03
Company confidential
Copyright Nokia. All rights reserved..
NHM-1
Page 27