CCS Technical Documentation
WCDMA TX Band Response Tuning
This alignment requires use of a power meter ("thermal" sensor) or vector signal analyser.
•
Calibration is started from the Phoenix menu:
•
Press "Start" .
•
Tune the power 21 dBm at mid, low and high channels using the arrow buttons.
Press "Accept" after tuning is complete.
•
Save values to PM when tuning is complete.
Note: With the "Read" - button you can check the values stored in PM.
Issue 1 11/03
Tunings/WCDMA/TX Band Response Calibration
Copyright Nokia. All rights reserved..
NHM-1
Page 83