Updating The Jbv-1 Docking Station Software - Nokia NHM-1 Series Software Instructions

CCS Technical Documentation

Updating the JBV-1 Docking Station Software

The next step is to install or update the JBV-1 USB drivers which are delivered with the
JBV-1 SW installation package. They can be found in folder:
C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver
If there is no previously installed JBV-1 Firmware update package installed on your com-
puter, Windows will detect connected USB cable and detect drivers for new HW. You will
be prompted about this, please follow the instructions and allow Windows to search and
install the best Drivers available.
If there is a previously installed JBV-1 Firmware update package ( v 17 or older) on your
computer, please update the JBV-1 USB Driver. Please see the readme.txt – file under
C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver – folder for instruc-
tions on how to update the JBV-1 USB Driver.
After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW update
can begin.
Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware Update and
start JBV-1 Update SW by double clicking fwup.exe.
JBV-1 Firmware update starts and shows current satus of the JBV-1 connected.
If firmware version read from your JBV-1 is not the latest one available ( v. 17 or older) ,
it needs to be updated to version 18 by choosing "Update Firmware".
".
To update your JBV-1 to new version 18 choose file JBV1v18.CDE and "Open"
Please wait, it takes a while until you can hear a "click" from the JBV-1.
The older sw file JBV1v17.CDE is visible in this view only if the previous JBV-1 SW pack-
age has been installed on your computer.
Issue 1 11/03
Company confidential
Copyright Nokia. All rights reserved..
NEM-1
Page 43