Preparation For On-Site Adjustment - Mitsubishi Electric BAC-HD150 Instruction Book

BAC-HD150
Step-1
Step-3
System controller
7.2

Preparation for on-site adjustment

Have the following tools and documents ready before performing on-site adjustment and a test run.
Item
Air conditioning control system diagram
Instruction Book that came with BAC-HD150
Instruction Book that came with Setting Tool
Reference
BAC-HD150 Installation Manual
Relevant air-conditioner and controller's
Instructions Books and Installation Manuals
Miscellaneous
Computer
USB memory
Installation CD for the Setting Tool
HUB
Tools and parts
Two LAN cables (category 5 or above) (straight cable)
General tools such as a driver
Tester
Miscellaneous
HUB
®
BACnet
LAN1
M-NET
Outdoor unit
ME remote controller
Outdoor unit
ME remote controller
Description
BMS
HUB
M-NET
Indoor unit
M-NET
Indoor unit
Group configuration, IP address, Control item, and
etc.
(This document)
®
BACnet
notification items, destinations, and methods.
For Setting Tool
For setting data backup
Setup disk
For connection to Setting Tool
For connection to Setting Tool
Use to check wiring and voltage.
- 31 -
LOSSNAY
LOSSNAY
Step-2
Notes
device list Documents related to
Step-4