Mitsubishi Electric BAC-HD150 Instruction Book page 23

(2) Rotary switches
Rotary switches include SW606 and SW607.
SW606 and SW607 are used to operate BAC-HD150.
(Refer to section 6.7 Operation Functions for details.)
The arrow on the rotary switch indicates the current setting of the switch.
(The available setting range is 0 through F. The figure below shows representative values only.)
The figure below shows a rotary switch that is set to 0.
0
8
(3) Push switches
Push switches include SW605 and SW403.
(a) SW605
SW605 is used to use the display and operation functions.
(Refer to sections 6.6 Display Functions and 6.7 Operation Functions for details.)
(b) SW403
Press SW403 to restart BAC-HD150.
CAUTION:
Pressing SW403 will restart BAC-HD150. Use caution not to accidentally push this switch, for the
Building Management System may falsely detect the communication with BAC-HD150 as an
error.
- 23 -