Setting Initialization Parameters - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual



5.2 Setting Initialization Parameters

When starting the SmartLogger for the first time, set initialization parameters on the
monitoring panel. The initialization parameters include system language, system time, the
search address segment for the RS485 port, and the Ethernet parameters.
Context
Procedure

LCD
Issue 04 (2013-12-15)
When starting the SmartLogger, use only the 12 V power adapter shipped along with the
shell. If adapters of other models are used, the SmartLogger may be damaged.
Log into the SmartLogger on the monitoring panel. When you log in to the Settings page
or Maintenance page, an identity authentication is required. The initial password is
000001. Change the password as soon as possible to ensure the security of the user
account. For details about how to change the password, refer to
Password.
If the SmartLogger is started for the first time, set the initialization parameters by referring to this
section. If it is not started for the first time, it directly performs the automatic search and then the default
page.
The following table describes the process for setting initialization parameters. The
parameter values in the following figures are for reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6.2.9 Changing a
Operation Procedure
1. After startup, the SmartLogger enters the
initialization page.
The default system language is English.
2. Press to enter the Wizard page.
To return to the default page, press ESC. If
some later re-settings are required, refer to
6.2.6 Setting the System
Setting System Time Parameters, and
Setting Communications
5 System Operation
Language, 6.2.7
6.2.10
Parameters.
37