Port Settings - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Status area, as shown in
as Advanced User.
Figure 7-63 Email
Note the following when setting email parameters:




7.28 Port Settings

This topic describes how to reset a 3G router by configuring a DO port or USB port.
Issue 04 (2013-12-15)
Figure
 SMTP Server can be set to the domain name or IP address of the SMTP server.
If this parameter is set to the domain name of the SMTP server, ensure that the address of the DNS
server is set properly.
 User Name and Password indicate the user name and password that need to be entered when you
log in to the SMTP server.
 You can click Send Test Mail to check whether the SmartLogger can successfully send emails to
users.

You can enable or disable the function of sending emails to inform you of the energy yield or alarm
information as required.
Before setting email parameters, set the DNS server address. By default, you can set the
DNS server address to the IP address of the 3G router or obtain an address from the
network provider as the DNS server address. For detailed operations, see
Ethernet Parameters.
If you want to be informed of the energy yield information by emails at regular intervals,
enable the relevant function and set the sending time.
Alarm emails are sent in trigger mode. That is, with the relevant function enabled and
alarm severity preset, a notification email is sent to you if an alarm of this severity or
higher is generated.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7-63. Because of the limited permission, select the User name
7 Web User Interface
7.22 Setting
144