Mounting The Smartlogger On A Wall - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual


Procedure
Step 1 Take the SmartLogger out from the package.
Step 2 Place the SmartLogger onto a horizontal desk.
----End

3.5.2 Mounting the SmartLogger on a Wall

This topic describes how to mount the SmartLogger on a wall.
Context


Procedure
Step 1
Install the expansion tubes and screws.
If you need to use a ladder to install the SmartLogger on a high position, keep balance to
protect yourself from falling down.
1.
Issue 04 (2013-12-15)
Ensure that the desk on which the SmartLogger is installed is horizontal to prevent it from
falling down.
Install the SmartLogger in places where cables cannot be easily touched to avoid signal
disruption.
Before hanging the SmartLogger on the screws, secure the expansion tubes and screws
into the wall.
Install the SmartLogger on a solid and smooth wall to ensure that it can be secured on the
wall.
Use a plumb line to ensure that the line between the centric points of the two holes is
vertical to the ground. Use a marker to mark out the holes, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure 3-4.
18