Table of Contents
Advertisement
Connect to the App
Reset WiFi
2
1. Open the upper cover and find the WiFi indicator.
2. Press and hold the
and
"Resetting WiFi" voice alert. The reset is complete when the
WiFi indicator flashes slowly. The robot will then wait for a
connection.
Note: If you cannot connect to the robot due to your router configuration, a forgotten
password, or any other reason, reset the WiFi and add your robot as a new device.
buttons until you hear the
WiFi indicator light
Off: WiFi disabled
Flashing slowly: Waiting for
connection
Flashing quickly: Connecting
Steady: WiFi connected
Add device
3
On the app homepage, tap "+" in the top right corner and
follow the prompts to add a device.
Note:
The actual process may vary due to ongoing app updates. Follow the instructions
provided in the app.
Only 2.4GHz WiFi is supported.
If the robot waits more than 1 hour for a connection, WiFi will be automatically disa-
bled. If you need to reconnect, reset the WiFi before proceeding.
022
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the S7 and is the answer not in the manual?
Questions and answers
I took the machine apart to clean all the hair from my dogs. Now I cannot find how to plug in the battery
i keep getting wall sensor dirty notifications even tough I cleaned them and they were very fine, then wouldn't connect tot the internet or if it did didn't stay connected then lastly unit temp protection error. The battery was at 100% and hadn't been running at all before this error. What might be going on?
Wall sensor dirty notifications can be caused by dirt on the wall sensor, which should be wiped with a soft dry cloth. Internet connection issues may occur due to WiFi being disabled, poor WiFi signal, or an abnormal WiFi connection, which can be resolved by resetting the WiFi, moving the robot to a better signal area, or updating the mobile app. Unit temperature protection errors may happen when the battery temperature is abnormal, requiring a wait for it to return to normal before use.
This answer is automatically generated
What level of WiFi S7 use? 5G or 2G
The Roborock S7 supports 2G WiFi. It does not support 5G WiFi.
This answer is automatically generated