Toro Topdresser 2500 Operator's Manual page 26

Assembling the Slider Bed
1. At the left side of machine, assemble the
slider-frame rail to the left fender
with the 2 capscrews and 2 washers that you
removed in Disassembling the Slider Bed (page
24), and tighten the capscrews.
Figure 30
1. Lifting rod
2. At the right side of machine, tighten 2 capscrews
that secure slider-frame rail to the right fender
(Figure 31).
Figure 31
1. Capscrews (slider-frame rail)
3. Carefully rotate the hopper down onto the
slider-frame rails; refer to
Disassembling the Slider Bed (page
4. At each side of machine, secure the hopper
to slider-frame rails
capscrews, 2 washers, and 2 locknuts that you
removed in Disassembling the Slider Bed (page
24).
(Figure 30)
2. Capscrews (slider-frame
rail)
Figure 27 of
24).
(Figure 32) with the 2
1. Capscrews (hopper mounting)
5. Tension the conveyer belt; refer to
the Conveyor Belt (page
Installing the Conveyer Chain
1. Assemble the chain onto the small sprocket and
g012671
secure the chain with the master link
1. Drive chain
g012670
2. Master link
2. If you loosen the motor-mount bolts, tension
the conveyer-belt chain, refer to
Conveyor-Belt Chain (page
3. Install the chain cover
26
Figure 32
Right side shown
Tensioning
23).
Figure 33
3. Motor
Tensioning the
22).
(Figure 34).
g012668
(Figure 33).
g012666