Mitsubishi Electric 800 Series Instruction Manual page 85

• Model information monitor
Register
44001 Model (First and second characters)
44002 Model (Third and fourth characters)
44003 Model (Fifth and sixth characters)
44004 Model (Seventh and eighth characters)
44005 Model (Ninth and tenth characters)
44006 Model (Eleventh and twelfth characters)
Model (Thirteenth and fourteenth
44007
characters)
Model (Fifteenth and sixteenth
44008
characters)
Model (Seventeenth and eighteenth
44009
characters)
Model (Nineteenth and twentieth
44010
characters)
44011 Capacity (First and second characters)
44012 Capacity (Third and fourth characters)
44013 Capacity (Fifth and sixth characters)
NOTE
• When a 32-bit parameter setting or monitored value is read and the read value exceeds HFFFF, the reply data will be
HFFFF.
84
PARAMETER
Definition
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read/Write
Reading inverter type in ASCII code.
"H20" (blank code) is set for blank area.
Example of FR-A840-E1 (FM type)
H46, H52, H2D, H41, H38, H34, H30, H2D, H45, H31,
H20......H20
Reading inverter capacity in ASCII code.
Data is read in increments of 0.1 kW, and rounds down to
0.01 kW increments.
"H20" (blank code) is set for blank area.
Example
0.75K......"7"
(H20, H20, H20, H20, H20, H37)
Remarks