The µPD98413 has a JTAG boundary scan circuit.
Caution: Some pins do not support the JTAG, as shown in the table.
Type
PECL-level pins
ohters
T.B.D
6.1 Features
• Conforms to IEEE1149.1 JTAG Boundary Scan Standard.
• Three registers dedicated to boundary scan
•
Instruction register
•
Bypass register
•
Boundary scan register
• Three instructions supported
•
BYPASS instruction
•
EXTEST instruction
•
SAMPLE/PRELOAD instruction
• Five pins dedicated to boundary scan
•
JCK (JTAG Clock)
•
JMS (JTAG Mode Select)
•
JDI (JTAG Data Input)
•
JDO (JTAG Data Output)
•
JRST_B (JTAG Reset)
CHAPTER 6 JTAG BOUNDARY SCAN
CHAPTER 6 JTAG BOUNDARY SCAN
Name of Pin Which Does Not to Support JTAG
T.B.D
T.B.D
T.B.D
PRELIMINARY
Number of Pins
T.B.D
T.B.D
T.B.D
NEC confidential and Proprietary
305