Supported Sizes Of Paper; Guidelines For Using Paper - Samsung CLP-300 User Manual

Supported Sizes of Paper

*
Tray (mm/in)
Plain paper
Letter (216 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
A5 (148 x 210/5.83 x 8.27)
Executive (184 x 267/7.25 x 10.5)
Legal (216 x 356/8.5 x 14)
JIS B5 (182 x 257/7.17 x 10.12)
A6 (105 x 148/4.13 x 5.83)
Oficio (216 x 343/8.5 x 13.5)
Folio (216 x 330/8.5 x 13)
Envelopes
No.10 (105 x 241/4.13 x 9.49)
DL (110 x 220/4.33 x 8.66)
C5 (162 x 229/6.38 x 9.02)
C6 (114 x 162/4.49 x 6.38)
Monarch (98 x 191/3.87 x 7.50)
No.9 (98 x 225/3.87 x 8.87)
6 3/4 Envelop(92 x 165/3.62 x 6.5)
***
Labels
Letter (216 x 279/8.5 x 11)
A4 (210 x 297/8.3 x 11.7)
Transparency films
Letter (216 x 279/8.5 x 11)
A4 (210 x 297/8.3 x 11.7)
Card stocks
Post Card (101.6 x 152.4/4 x 6)
Minimum size
(custom, 76 x 127/3 x 5)
Maximum size (Legal)
* The printer supports a wide range of media sizes.
** Capacity may vary depending on print material's weight and thickness, and environmental con-
ditions.
*** Smoothness: 100 to 250 (Sheffield)
N
: You may experience jams when using print materials
OTE
with a length of less than 140 mm (5.5 in). For optimum
performance, ensure that you are storing and handling the
paper correctly. Please refer to "Printer and Paper Storage
Environment" on page 8.3.
Paper tray Weight Capacity
Tray 60 to 90 g/ 150 sheets
2
m (16 to 24 of 75 g/m
lb bond) (20 lb
bond) paper
Manual feed 60 to 105 g/ 1 sheet of
m 2 (16 to 23 paper
lb bond)
Manual feed 75 to 90 g/ 1 sheet of
2
m (20 to 24 paper
lb bond)
Manual feed 120 to 150 g/ 1 sheet of
m 2 (32 to 40 paper
lb bond)
Manual feed 138 to 146 1 sheet of
paper
2
g/m (37 to
39 lb bond)
Manual feed 105 to 163 1 sheet of
2
g/m (23 to paper
44 lb bond)
Manual feed 60 to 120 g/ 1 sheet of
2
m (16 to 32 paper
lb bond)
Manual feed 1 sheet of
paper

Guidelines for Using Paper

For the best result, use conventional 75 g/m
**
Ensure that the paper is of good quality, and free of cuts, nicks,
tears, spots, loose particles, dust, wrinkles, voids, and curled
2
or bent edges.
If you are unsure of what type of paper you are loading, such
as bond or recycled paper, check the label on the package.
The following problems may cause print quality deviations,
jamming or even damage to the printer.
Symptom
Poor print quality
or toner
adhesion,
problems with
feeding
Dropout,
jamming, curl
Increased gray
background
shading/printer
wear
Excessive curl
problems with
feeding
Jamming,
damage to
printer
Problems with
feeding
N :
OTES
• Do not use letterhead paper printed with low-temperature
inks, such as those used in some types of thermography.
• Do not use raised or embossed letterhead.
• The printer uses heat and pressure to fuse toner to the
paper. Ensure that any colored paper or preprinted forms
use inks that are compatible with this fusing temperature
(180 °C or 356 °F for 0.1 second).
8.2
Specifications
2 (20 lb) paper.
Problem with
Solution
Paper
Too moist, too Try another kind of
rough, too paper, between 100 ~
smooth, or 250 Sheffield, 4 ~ 5 %
embossed; faulty moisture content.
paper lot
Stored improperly Store paper flat in its
moisture-proof
wrapping.
Too heavy Use lighter paper.
Too moist, wrong Use long-grain paper.
grain direction, or
short-grain
construction
Cutouts or Do not use paper with
perforations cutouts or
perforations.
Ragged edges Use good quality
paper.