Understanding The Control Panel; Leds; Stop Button - Samsung CLP-300 User Manual

Understanding the Control Panel

LEDs

Status Toner
LED LEDs
lights All LEDs The printer is ready to print.
green off
slowly All LEDs The printer is receiving data from
blinks off the computer.
green
fast blinks All LEDs The printer is printing data.
green off
lights red All LEDs • The printer is experiencing an
off
• The printer is experiencing a
lights each LED Each toner cartridge is near the
green blinks red end of its life.
Toner LEDs
Description
error, such as jammed paper,
open cover, empty paper, not
installated waste toner container,
or full waste toner container.
service required error, such as
LSU error, fuser error, or ITB
error. Contact your sales or
service representative.
Introduction
Status
LED
blinks red each LED
lights red
lights red each LED
lights red
lights each LED
green blinks red
in a
repeated
order
N
: All printing errors will be appear in the Smart Panel
OTE
program window.

Stop button

Function
Printing
demo page
Printing
configuration
sheets
Canceling
print job
1.3
Toner
Description
LEDs
Each toner cartridge is almost
empty. You can print. but the
quality is not reliable.
• Each toner cartridge is totally
exhausted. You can not print.
• Each toner cartridge is wrong.
The printer is warming up.
Description
In Ready mode, press and hold this button
for about 2 seconds until the Status LED
blinks fast, and release.
In Ready mode, press and hold this button
for about 5 seconds until the Status LED
blinks fast, and release.
Press this button during printing. The red
LED blinks while the print job is cleared
from both the printer and the computer,
and then the printer returns to Ready
mode. This may take some time depending
on the size of the print job.