Samsung CLP-300 User Manual page 17

5
Flex the paper sheets back and forth to separate the pages
and then fan them while holding one edge. Tap the edges
of the stack on a flat surface to even it up.
6
Load paper with the print side up.
Make sure not to overfill the tray and that all four corners
are flat in the tray and under the brackets, as shown
below. Overfilling the tray may cause a paper jam.
N
: If you want to change the size of the paper in the tray,
OTE
refer to "Changing the Size of the Paper in the Tray" on
page 2.5.
7
Squeeze the paper length guide and slide in it until it
lightly touches the end of the paper stack.
8
Close the paper cover.
9
Slide the tray back into the printer.
N
OTE
for the paper type, size, and source you loaded. For details,
see the Software Section.
2.4
Setting Up Your Printer
: After you load paper, you need to set up your printer