Connecting A Printer Cable; For Local Printing; For Network Printing (Clp-300N Only) - Samsung CLP-300 User Manual

Connecting a Printer Cable

For Local Printing

To print from your computer in a local environment, you need
to connect your printer to the computer with a Universal Serial
Bus (USB) cable.
N
: Connecting the printer to the USB port of the computer
OTE
requires a certified USB cable. You will need to buy a USB 2.0
compliant cable that is not longer than 3 m.
1
Make sure that both the printer and the computer are
turned off.
2
Plug the USB cable into the connector on the rear of the
printer.
3
Connect the other end of the cable to the USB port on your
computer.
N
: To print using the USB interface, you must run Windows
OTE
98/Me/2000/2003/XP or Macintosh with OS 10.3 ~10.4.

For Network Printing (CLP-300N only)

You can attach your printer to a network using an Ethernet
cable (UTP cable with RJ.45 connector). The CLP-300N has a
built-in network interface card.
1
Make sure that both the printer and the computer are
turned off.
2
Plug one end of the Ethernet cable into the Ethernet
network port on the rear of the printer.
3
Plug the other end of the cable into a network LAN
connection.
N
OTE
network parameters using the software supplied with the
printer. Refer to 7.1
2.6
Setting Up Your Printer
: After connecting the printer, you need to configure the
To the network LAN
connection