Table of Contents
Advertisement
Product care
Your product doesn't need much maintenance: keep it clean, check for blockages,
remove hair from the brush bar and charge the battery. Wipe it with a dry cloth if it gets
dirty. Never wash it with liquid, run it under a tap or use it without the bag. Regularly
check if the bag is full.
Troubleshooting
Product is not
cleaning well
Product has stopped or
won't work
4 red lights displayed
on battery
Product support
If these initial tips do not solve your problem, we have various other ways to help.
Visit: www.gtech.co.uk/support
Online
GTECH PRO 2 TECHNICAL SPECIFICATION
Battery model
Battery
Charging period
Battery charger output
Weight (with standard nozzle)
20
1. Change the bag
2. Check for blockages - refer to above instructions.
3. Remove hair from brush bar
4. Check to see if scented cartridge is fitted
1. Charge the battery (check the socket works and is
turned on)
2. It might be blocked – refer to above instructions
1. Brush bar jammed
2. Turn off the product, remove the battery and clear
the blockage
Live chat support
109A0015
22V 2000mAh Li-Ion
4 hours
27V DC 500mA
2.4kg
support@gtech.co.uk
How to videos
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro2 and is the answer not in the manual?
Questions and answers
The m/c runs for about a min. then stops when put on charge the green lights go on and off
The Gtech Pro 2 may stop running after about a minute due to a low battery. The flashing green lights indicate that the battery is charging. Recharge the battery fully (which takes 4 hours) before using the vacuum again. If the issue persists, check for blockages or other obstructions.
This answer is automatically generated