Gtech AirRAM AR29 Operating Manual
Hide thumbs Also See for AirRAM AR29:

Advertisement

4092_AR29_UK_manual_aw.indd 1
4092_AR29_UK_manual_aw.indd 1
OPERATING MANUAL
Model number:
AR29
10/02/2020 14:30
10/02/2020 14:30

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AirRAM AR29 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gtech AirRAM AR29

  • Page 1 Model number: AR29 OPERATING MANUAL 4092_AR29_UK_manual_aw.indd 1 4092_AR29_UK_manual_aw.indd 1 10/02/2020 14:30 10/02/2020 14:30...
  • Page 2: Important Safeguards

    • This appliance includes Li-Ion batteries; do • Only use batteries and chargers supplied not incinerate batteries or expose to by Gtech. high temperatures, as they may explode. • Never modify the charger in any way. • Liquid ejected from the battery may cause •...
  • Page 3: Intended Use

    • When you dispose of the appliance test on an inconspicuous area first. remove the battery and dispose of the • The Gtech AirRAM has been designed battery safely in accordance with local to clean a wide variety of floor surfaces regulations.
  • Page 4: What's In The Box

    Thank you for choosing a Gtech AirRAM “I started Gtech to create sensible, easy to use products that do a great job. Your opinion is important to us and we’ll use your feedback to improve our products and services, and to let other people know what it’s like to be part of the Gtech family.”...
  • Page 5 Assembly Ensure the lower handle is sitting completely To attach the lower handle to the head flush against the yoke. Then push the green assembly, insert the metal pin on the lower locking clip into the back of the head. handle into the hole located on the pivot yoke.
  • Page 6 Assembly (continued) The green locking clip, when correctly fitted, Insert the upper handle into the lower handle. You will need to press the button on the upper will click and hold the lower handle in place. handle to fit it in. Should the handle assembly need to be removed the clip can be pulled out to unlock Once it slides down you will hear it click into...
  • Page 7: Operation

    Operation Without pressing the power button, place The power button is located on the left hand your foot on the left side of the AirRAM head side of the AirRAM head assembly. and pull the handle back. Press the power button with your foot to turn the AirRAM on.
  • Page 8: Battery Charging

    Battery charging When the state of charge indicator starts to The battery can be charged whilst it’s in the flash one green LED, recharge the battery. AirRAM, or when it’s off the product. To remove the battery, squeeze the latch underneath and pull upwards.
  • Page 9: Emptying The Bin

    Emptying the bin Holding onto the AirRAM with one hand, pull Lift and release the latch marked with the green the bin handle and lift the bin out of arrow to pull open the lid. the AirRAM. Hold the AirRAM’s bin over a rubbish bin Pull the green lever back towards the bottom and push the green lever towards the lid to of the bin.
  • Page 10: Cleaning The Filters

    Cleaning the filters - do this once a month or more frequently depending on use. Holding onto the AirRAM with one hand, pull Pull the filter out of the filter housing. the bin handle and lift the bin out of Tap the dirt from the filter and tip any the AirRAM.
  • Page 11: Replacing The Filters

    Replacing the filters Slide the filter onto the inner shroud. Slide the filter and inner shroud into the filter housing. Removing and cleaning the brush bar If the brush bar jams during use, the AirRAM Rest the AirRAM on its side and locate will stop and the LEDs will appear red.
  • Page 12 The brush bar can now be removed, starting at To remove hair from the brush bar, run an the button end. open pair of scissors down the groove to cut the hair, then pull it out. Re-insert the brush bar, starting by the end Replace the battery by sliding it down into the furthest away from the button.
  • Page 13: For Household Use Only

    Clearing a jam / fault seconds If the brush bar jams during use, the AirRAM The AirRAM will not re-start until the red lights will stop and the LEDs will appear red. You will go out. This will take ten seconds. need to remove and clean the brush bar (see page 11).
  • Page 14: Product Care

    Product Care Your Gtech AirRAM doesn’t need much maintenance: keep the filters clean, keep the brush bar tangle- free and charge the battery. Wipe it with a dry cloth if it gets dirty, including under the bin. Troubleshooting AirRAM is not cleaning well 1.
  • Page 15: Warranty Registration

    XXXXX~ WWYY~ 00~0000000 If you purchased directly from Gtech your details are already registered and your 2 year warranty will start automatically. If you purchased from an authorised Gtech retailer, please register your warranty within 3 months and you will need to provide proof of purchase to support any claim against your warranty.
  • Page 16 Grey Technology Limited Brindley Road, Warndon, Worcester WR4 9FB email: support@gtech.co.uk telephone: 01905 345891 www.gtech.co.uk 4092_AR29_UK_manual_aw.indd 16 4092_AR29_UK_manual_aw.indd 16 10/02/2020 14:30 10/02/2020 14:30...

Table of Contents