Mitsubishi Electric GOT1000 Series User Manual page 6

[STARTUP AND MAINTENANCE PRECAUTIONS]
 Do not disassemble or modify any unit.
This will cause failure, malfunction, injuries, or fire.
 Do not touch the conductive areas and electronic parts of thisunit directly.
Doing so can cause a unit malfunction or failure.
 Do not change the switch settings while power is on.
This may cause failures or malfunctions.
 Make sure to externally shut off all phases of the power supply before
cleaning the unit and retightening unit mounting screws.
Failure to do so may cause the unit to fail or malfunction.
Loose tightening may cause a fall of the unit, short circuits, or malfunctions.
Overtightening may damage the screws and/or the unit, resulting in a fall of
the unit, short circuits or malfunctions.
 Always make sure to touch the grounded metal to discharge the electricity
charged in the body, etc., before touching the unit.
Failure to do so may cause a failure or malfunctions of the unit.
[DISPOSAL PRECAUTIONS]
 Dispose of this product as industrial waste.
[TRANSPORTATION PRECAUTIONS]
 Make sure to transport the GOT main unit and/or relevant unit(s) in the
manner they will not be exposed to the impact exceeding the impact
resistance described in the general specifications of the GT15 User's Manual,
as they are precision devices.
Failure to do so may cause the unit to fail.
Check if the unit operates correctly after transportation.
CAUTION
CAUTION
CAUTION
A-5