Yamaha RM1x Owner's Manual page 95

Job 24 Put Phrase
1
3
2
This job copies a selected user phrase into a specified area of
a selected song. Any data previously existing in the destina-
tion area is erased.
You select the source phrase by its style and phrase numbers.
You select the destination by song number, track number (se-
quence track), and measure number (location on track).
The job does not copy meter, voice, or tempo settings. The
phrase's meter (time signature) has no effect on the copy.
1. Source phrase (Category, Number )
The Phrase value selects the phrase to be copied.
Settings : 001 ... 256
2. Destination song
The Song value selects the destination song.
Settings : 01 ... 20
3. Destination track
The Track value selects the sequence track onto which
the phrase is to be copied.
Settings : 01 ... 16
4. Track location
The "M" value selects the starting measure, on the se-
quence track, for the copy.
Settings : 001 ... 999
Job 25 Clear Phrase
1
This job deletes all data from the selected user phrase, and
reinitializes the phrase table.
1. Phrase
The Phrase value selects the user phrase to be deleted.
Settings : 001 ... 256
Job 26 Phrase Name
4
You use this job to set or change the name for a (non-empty)
user phrase. The name can be up to 8 characters long.
Use Display Knobs 1 and 2 to select a character location and
character, then press the F2 function button (Enter) to enter
the specified character at the selected location. The F1 func-
tion button (Delete) can be used to back up one character lo-
cation and delete the character at that location. Repeat until
the phrase name is complete.
Track
Job 27 Copy Track
1
2 3
This job copies all data (of the selected type) from selected
source track to selected destination track. You can copy track
data from a single section of a selected style.
The copy operation overwrites any data previously existing
on the destination track.
1. Source style, section, and track
The first three settings select the source track.
Settings : Style
2. Destination style, section, and track
The second group of settings selects the destination
track.
Settings : Style
U01 ... U50
Section A ... P
Track 1 ... 16
U01 ... U50
Section A ... P
Track 1 ... 16
RM1x SEQUENCE REMIXER
12. Job
95