Split (Song To Pattern); Split - Yamaha RM1x Owner's Manual

14. Song Split (Song to Pattern)

Split

This function allows a specified range of measures to be copied from the current song to a specified section in a specified user
style.
Track number
Parameter
Start measure
End measure
Style number
Section
DO!
Track number
Transpose
Measure
* For information about how to change values, refer to the Basic Operation (page26).
After specifying the start and end measures of the range
of song data you want to copy, and the destination style
and section, press the F4 function key (DO!). "Execut-
ing" will appear on the display briefly while the data is
being copied.
The SPLIT function makes the process of splitting a song
into multiple sections of the same length fast and easy.
Values
001 ... 999
001 ... 999
U01 ... U60
A ... P
01 ... 16
-36 ... +36
001 ... 999
14. Song Split (Song to Pattern)
Transpose
Function
Specifies the first measure in the range to be copied.
Specifies the last measure in the range to be copied.
Specifies the destination style number.
Specifies the destination section.
Press the F4 function button (DO!) to actually cut and copy the speci-
fied song data to the specified style and section.
Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
Shows the current transpose value. Transposition can be accom-
plished via this parameter, or by the keyboard method described on
page 27.
Sets playback start location; or shows current playback location.
After the first SPLIT operation the START MEAS and
END MEAS parameters will automatically be set in
preparation to copy the next range of measures: START
MEAS will be set to the previous END MEAS + 1, and
END MEAS will be set to specify a measure range of
the same length as the preceding range copied.
Measure
129
RM1x SEQUENCE REMIXER