Yamaha RM1x Owner's Manual page 133

page2
Parameter
Click mode
Click beat
Recording count
LED display
* For information about how to change values, refer to the Basic Operation (page26).
page3
Parameter
Event chase
System exclusive interval time
Edit view
LCD mode
* For information about how to change values, refer to the Basic Operation (page26).
Values
OFF, REC, REC/PLAY, ALL
16, 08, 04, 02, 01
OFF, 1 Meas, 2 Meas, 3 Meas,
4 Meas, 5 Meas, 6 Meas, 7
Meas, 8 Meas
BPM, MEAS
Values
OFF
PC
PC, PB, CTRL
ALL
000 ms, 100 ms, 200 ms, 300
ms, 400 ms, 500 ms, 600 ms,
700 ms, 800 ms, 900 ms
NORM, RM1x TG
POSI, NEGA
Function
Determines when the click feature (metoronome) is used.
"OFF" disables the click feature.
"REC" uses click for realtime recording only.
"REC/PLAY" uses click for realtime recording and playback.
"ALL" always use click.
Sets the click interval.
Sets the number of preliminary measures used as a lead-in for
realtime recording.
Determines whether the BPM display will normally show beats per
minute (BPM) or measure numbers (MEAS).
Function
See below.
See below.
Specifies the normal (NORMAL) or RM1x TG edit view mode for
the PATTERN and SONG EDIT modes. When the "RM1x TG mode
is selected the EDIT mode display will conform to the parameters of
the RM1x tone generation block.
Determines whether the LCD display will consist of black charac-
ters on a light background (POSI), or light characters on a black
background (NEGA).
1. System
133
RM1x SEQUENCE REMIXER