Yamaha RM1x Owner's Manual page 94

12. Job
3. Destination style (Style "b")
The lower Style value selects the style containing the
destination phrase (phrase "b").
Settings : U01 ... U50
4. Destination phrase (Phrase "b")
The lower Phrase value selects the phrase to which the
source phrase is attached.
Settings : 001 ... 256
Job 22 Split Phrase
1
5
This job splits a selected user phrase into two user phrases.
The job splits the phrase at the first beat of the specified meas-
ure. The initial portion of the phrase (up to the split) remains
in its original location, while the remainder of the phrase moves
into the specified destination.
The job overwrites any data already existing in the destina-
tion phrase.
1. Source style
The upper Style value selects the style containing the
user phrase to be split.
Settings : U01 ... U50
2. Source phrase
The upper Phrase value selects the user phrase to be
style.
Settings : 001 ... 256
3. Split time signature
Sets the time signature of the destination stiley
Settings : 1/16 ... 16/16; 1/8 ... 16/8; 1/4 ... 8/4
4. Split point
The "M" value selects the measure at which the phrase
is split. This becomes the start point of the destination
phrase.
Settings : 001 ... source-phrase length
5. Destination style
The lower Style value selects the destination style.
Settings : OFF, U01 ... U50
6. Destination phrase
The lower Phrase value selects the split destination.
Settings : OFF, 001 ... 256
94
RM1x SEQUENCE REMIXER
2 3 4
6
Job 23 Get Phrase
1
4
This job creates a user phrase from a specified segment of
song data. Specifically, it copies a segment of sequence-track
data from a song into the designated destination phrase.
The RM1x sets the time signature (meter) for the new phrase
equal to the meter recorded in the initial measure of the source
segment. (Note that meter value applies to the entire phrase.
Any meter changes that occur within subsequent measures of
the source segment are ignored.)
Maximum phrase length is 256 measures. If you attempt to
copy a segment that is longer than 256 measures, the screen
returns the "Illegal Input" message and the job does not ex-
ecute.
The job overwrites any data already existing in the destina-
tion phrase.
The job does not copy voice and tempo settings.
1. Source song
The Song value selects the song containing the source
data.
Settings : 01 ... 20
2. Source track
The Track value selects the sequence track containing
the source data.
Settings : 01 ... 16
3. Segment
The "M" values select the source segment, by its loca-
tion (in measures) on the source track. The first value
gives the initial measure; the second value gives the fi-
nal measure.
Settings : Initial measure:
Final measure:
(where final measure - initial meas-
ure 256, and final measure
measure)
4. Destination phrase
The Phrase value sets the phrase number for the desti-
nation user phrase.
Settings : 001 ... 256
2 3
001 ... 999
001 ... 999
initial