Yamaha RM1x Owner's Manual page 30

Basic Operation
Simultaneous Button & Knob Functions
Buttons/knobs simultaneously operated
STOP
SHIFT
PLAY
SHIFT
MUTE
SHIFT
PATTERN
SHIFT
PATT CHAIN
SHIFT
SONG
SHIFT
GROOVE
SHIFT
PLAY FX
SHIFT
MIDI DELAY
SHIFT
F1
SHIFT
MUTE MEMORY
SHIFT
SECTION[A] - [P]
SHIFT
Keyboard
SHIFT
Keyboard
SHIFT
Keyboard
SHIFT
Keyboard
SHIFT
Keyboard
SHIFT
Display Knob1 - 4
SHIFT
Knob 1 - 8
SHIFT
Knob 1 - 8
SHIFT
JOB
SHIFT
TRACK[1] - [16]
TRACK
BPM
TRACK
OCT DOWN
TRACK
OCT UP
TRACK
CURSOR buttons
TRACK
ALL
TRACK
[1] - [8]
TRACK
[9] - [16]
TRACK
Keyboard
TRANSPOSE
NUM [1]-[9], [0]
NUM
OCT DOWN
OCT UP
Keyboard
OCT UP
Keyboard
OCT DOWN
30
RM1x SEQUENCE REMIXER
This chart lists a number of RM1x functions which are
accessed either by simultaneously pressing two buttons, or by
operating a knob while holding a button.
Description
Specifies the current measure as the measure the RM1x will "jump" to
when the [STOP] button is pressed.
Starts loop playback of the currently selected song in the SONG mode.
Engages the SOLO mode.
Resets parameter changes applied by the Knobs in the PATTERN mode.
Resets parameter changes applied by the Knobs in the PATT CHAIN
mode.
Resets parameter changes applied by the Knobs in the SONG mode.
Resets the GROOVE parameters of the selected track.
Resets the PLAY FX parameters of the selected track.
Resets the MIDI DELAY parameters of the selected track.
Displays the amount of memory currently in use.
Stores the MUTE MEMORY setting.
Simultaneously hold the [SHIFT] button and the desired section button to
auto-retrigger section change according to the Pattern Quantize value
(page 132).
Adds the specified note during arpeggio playback.
Deletes the specified note during PATTERN Realtime Recording.
Deletes the specified note during Step Recording.
Selects the specified note during Grid Step Recording.
Selects a single note position and deselect all others in the GRID
GROOVE submode.
Rotate the appropriate Display Knob while holding the [SHIFT] button for
coarser, more rapid adjustment.
Allows the knob position to be changed without changing the effect
parameter.
Deletes all corresponding parameter data during PATTERN realtime
recording.
Executes the Undo/Redo operation.
Selects the specified track.
Selects the BPM track in the SONG mode.
Moves the cursor to successively lower track numbers.
Moves the cursor to successively higher track numbers.
Moves the cursor to tracks in the corresponding directions.
While holding the [TRACK] and [ALL] buttons simultaneously, the effect
of the Knobs will be applied to all tracks.
While holding the [TRACK] and [1~8] buttons simultaneously, the effect
of the Knobs will be applied to tracks 1~8.
While holding the [TRACK] and [9~16] buttons simultaneously, the effect
of the Knobs will be applied to tracks 9~16.
Changes the transpose value.
Enters the specified number.
Resets the keyboard octave.
Applies a maximum vibrato effect to the note.
Bends the note up to the maximum pitch allowed by the currently
specified pitch bend range.
See page
46
116
28
29
29
29
55, 119
57, 119
60, 119
29
28
28, 132
21, 62, 119
51
52, 118
53, 118
55, 119
26
29
51
29
27
116
25
25
25
29
29
29
27
26
13
13
13