Assigning a data block
Assign a data block (access block for writing) to the buffer memory.
For the data block (access block for writing), refer to the following manual.
MELSEC iQ-R BACnet Module User's Manual (Application)
Operating procedure
1.
Select [Settings] [BACnetRequest] [Write], and click the [Add] button in the "Reserved access for WriteProperty
requests." screen.
2.
Set '400' to "BufferMemoryAddress" and '1' to "Qty.", then click the [Add] button.
7 OPERATING EXAMPLE
7.2 Writing Values
7
45