Checking the operation
1.
Write a program to the CPU module on a BACnet workstation.
2.
Reset the CPU module, or turn the power OFF and ON on the BACnet workstation to run the CPU module.
3.
Turn M100 ON using an engineering tool.
For the change of current values, refer to the following manual.
GX Works3 Operating Manual
4.
Open the web browser of the BACnet workstation, select [BACnetRequest] [Write] button, and click the [Detail] button
in the row where "BufferMemoryAddress" is '190h'.
5.
Check the writing result of a value.
7 OPERATING EXAMPLE
7.2 Writing Values
7
49