Setting A Web Browser; Logging Into A Bacnet Module - Mitsubishi Electric MELSEC iQ-R Series User Manual

Setting a web browser

Set a local area network (LAN) using Internet Explorer
Unselect the "Use a proxy server for your LAN" checkbox in the "Local Area Network (LAN) Settings" screen.
Ex.
Internet Explorer 11
Select [Tool]  [Internet Options]  [Connections] tab  "Local Area Network (LAN) settings", and click the [LAN settings]
button.

Logging into a BACnet module

Operating procedure
1.
Start Internet Explorer and enter the address of a BACnet module, "http://192.168.0.254:8080/".
When the IP address of the BACnet module is changed, specify the IP address which has been set in the network information
to the "192.168.0.254" part in the address above.
MELSEC iQ-R BACnet Module User's Manual (Application)
• If the configuration personal computer cannot communicate with the BACnet module, issue a PING
command from the configuration personal computer to the BACnet module to check the communication of
the BACnet module.
2.
Enter a user name and a password in the following screen.
• User name: root
• Password: rj71bac96
If a user name or password is changed, enter the user name or password set in the user setting.
MELSEC iQ-R BACnet Module User's Manual (Application)

.
4 PROCEDURES BEFORE OPERATION
4.2 Configuring Settings Using a Web Browser
4
27