4.2
Configuring Settings Using a Web Browser
This section shows the procedure to configure the settings using a web browser.
1.
Configure the network settings on the configuration personal computer.
Page 26 Setting network for a configuration personal computer
2.
Set a web browser.
Page 27 Setting a web browser
3.
Log into the BACnet module.
Page 27 Logging into a BACnet module
4.
Set the BACnet module.
Page 28 Setting a BACnet module
Setting network for a configuration personal computer
Operating procedure
1.
Set the same network portion of the IP address between a configuration personal computer and a BACnet module.
Network portion
IP address
Subnet mask
Default value of the BACnet module
2.
Set the network setting for a configuration personal computer in the "Internet Protocol Version 4 (TCP/IPv4) Properties"
screen.
(Example) Microsoft
Select [Control Panel] [Network and Internet] [Network and Sharing Center] [Change adapter settings].
Select [Local Area Connection], and select [Properties] from the shortcut menu.
Select "Internet Protocol Version 4 (TCP/IPv4)" in the "Local Area Connection Properties" screen, and click the [Property]
button.
"Internet Protocol Version 4 (TCP/IPv4) Properties" screen appears.
4 PROCEDURES BEFORE OPERATION
26
4.2 Configuring Settings Using a Web Browser
Host portion
192.168. 0.
254
255.255.255.
0
Windows 7 Ultimate
Set the same value.
IP address
Subnet mask
Configuration personal computer
Set different values.
Network portion
Host portion
192.168. 0.
10
255.255.255.
0