Chapter 3 Function List; Bacnet Module Function List - Mitsubishi Electric MELSEC iQ-R Series User Manual

3
FUNCTION LIST
This chapter shows the function list of a BACnet module.
For details on the functions, refer to the following manual.
MELSEC iQ-R BACnet Module User's Manual (Application)
3.1

BACnet Module Function List

The following shows the function list of a BACnet module.
Function
BACnet object function
Backup function
Data block function

BACnet request function
BACnet monitoring function
COV interaction function
Event interaction function
Calendar interaction function
Joining/leaving function
Time synchronization function
Configuration function
Description
A function to use a programmable controller system as a BACnet controller.
This function is provided by registering BACnet objects.
A function to save property values automatically when the powering OFF of the programmable controller
system is detected.
A function to read/write the values of properties and to receive the information of services using a
program.
This function can be used by assigning data blocks to buffer memory.
Read function A function to read the values of properties in a BACnet module or a BACnet device.
A data block (access block for reading) is used for this function.
Write function A function to write the values of properties in a BACnet module or a BACnet device.
A data block (access block for writing) is used for this function.
A function to monitor the values of properties in a BACnet module or a BACnet device.
A data block (access block for BACnet monitoring) is used for this function.
A function to receive COV notifications from a BACnet device.
A data block (access block for COV interaction) is used for this function.
A function to receive Event notifications from a BACnet device.
A data block (access block for Event interaction) is used for this function.
A function to copy the calendar information, which is referenced at the time of performing scheduled
operation, from another BACnet device.
A function to join/leave BACnet automatically by turning an input/output signal ON and OFF.
A function to synchronize the time of a BACnet module or a BACnet device with that of a CPU module.
A function to set a BACnet module using a web browser.
3 FUNCTION LIST
3.1 BACnet Module Function List
3
21