Mitsubishi Electric MELSEC iQ-R Series User Manual page 27

5.
Add a BACnet module.
Item Description
Module Type Select "Network Module".
Module Name Select "RJ71BAC96".
Mounting Slot No. Select the slot number where the BACnet module is mounted.
Start I/O Specification When do not specify the start I/O number of the BACnet module, select "Not Set" to "Start I/O No. Specification". To specify the start
I/O number, select "Set".
Start I/O No. When "Set" is selected in "Start I/O No. Specification", enter the start I/O number of the BACnet module.
6.
Set the module parameter of the BACnet module.
Navigation window  [Parameter]  [Module Information]  double-click [RJ71BAC96]
7.
After setting parameters, write the settings to the CPU module from the engineering tool.
8.
Reset the CPU module, or turn the power OFF and ON to apply the settings.
4 PROCEDURES BEFORE OPERATION
4.1 Configuring Settings Using Engineering Tool
4
25