Mitsubishi Electric MELSEC iQ-R Series User Manual page 55

Voltage output characteristic
The following shows the list of the analog output ranges and the graph of each voltage output characteristic, at the voltage
output.
V
15
10
5
(1)
0
-5
-10
-15
-32768 -32000
digit: Digital value
V: Analog output voltage (V)
(a): Practical analog output range
No. Analog output range setting
(1) 1 to 5V
(2) 0 to 5V
(3) -10 to 10V

User range setting
*1 Set the offset value and gain value in the user range setting within a range that satisfies the following conditions. If the following
conditions are not satisfied, D/A conversion may not be performed properly.
Setting range of the offset value and gain value: -10 to 10V
((gain value) - (offset value))  4V
*2 Maximum resolution in the user range setting.
Set values within the practical range of the digital input and analog output at each output range. If the values
are out of the range, the resolution and accuracy may not fall within the range of the performance
specifications. (Do not use values in the dotted line regions in the graph of voltage output characteristics.)
(3)
1
(2)
-768 0
Offset value
1V
0V
0V
*1
(a)
digit
32000 32767
Gain value Digital value
5V 0 to 32000
5V
10V -32000 to 32000
*1
-32000 to 32000
Appendix 1 I/O Conversion Characteristics
Resolution
125.0V
156.3V
312.5V
A
*2
312.5V
APPX
53