Chapter 8 Offset/Gain Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

8
OFFSET/GAIN SETTING
Using the user range setting requires setting the offset and gain values.
Access the "Offset/Gain Setting" window in the engineering tool to set the offset and gain values.
Setting procedure
The procedure for the offset/gain setting of the D/A converter module is as follows. The offset/gain setting is disabled in the
high-speed output mode, the wave output mode, and the inter-module synchronization mode. Change the mode to the normal
output mode or the offset/gain setting mode and set the offset and gain values.
In addition, do not turn off the external power supply while in the offset/gain setting. If the external power supply is turned off
while in the offset/gain setting, the offset/gain setting cannot be properly completed.
1.
In "Analog Output", select "Offset/gain setting (High-Speed Analog)" and click the [OK] button.
[Tool]  [Module Tool List]
2.
Select the target module for the offset/gain setting, and click the [OK] button.
8 OFFSET/GAIN SETTING
8
47