Identifying Port Location - NEC Aspire S Manual

Identifying Port Location

Port information such as PCB type, port numbers, PCB status, and individual port status can be obtained
from the system. To obtain a System Report containing PCB information, the system must be connected to a
PC or terminal using the serial port connector on the CPU.
Running program 90-13-03 in MAINTENANCE PROGRAMS prints a system PCB report. Refer to Pro-
gram 90-13-03 : System Information Output in the Software Manual. The following is a typical report:
<<SYSTEM INFORMATION>>
slot
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Aspire S Hardware Manual
Section 2: PCB Installation and Startup
location type
1-1 ESIU
1-2 SLIU
1-3 ESIU
1-4 SLIU
1-5 COIU
1-6 DIOPU
1-7 - none -
1-8 - none -
2-1 - none -
2-2 - none -
2-3 - none -
2-4 - none -
2-5 - none -
2-6 - none -
2-7 - none -
2-8 - none -
assign port condition
1- 8 Running
9- 10 Running
11- 18 Running
19- 26 Running
1- 4 Running
5- 6 Not Install
Section 2: PCB Installation and Startup ◆ 2-49
011/03/03 09:49
note
****---- -------- Connect:*
2