Table of Contents
Advertisement
Section 4: Telephones and Optional Equipment
4.
5.
6.
7.
8.
9.
PC Connection
Ethernet PC
4-52 ◆ Section 4: Telephones and Optional Equipment
Position the adapter with the connector positioned as shown below.
Figure 4-52: POSITIONING THE ADAPTER
Hook the two plastic prongs into the bottom of the phone.
Push the connector into place. The top latch on the top of the adapter should lock into place when it
is properly positioned.
Plug an AC/DC adapter into the AC jack on the adapter if power is not supplied by the LAN.
Plug in the LAN straight-thru cable from the 4VOIPU-S PCB LAN connector for the phone opera-
tion. If needed, connect the PC cross cable to the VoIP Adapter.
Refer to the Aspire Software Manual (P/N 0893200) for required programming.
To avoid any hardware problems, when removing the adapter, first unplug the line cord, then
the power cord, then any other adapter cables.
Aspire IPhone,
Aspire Keyset with IP Adapter or
H.323 Terminal
Straight-Thru
Cable
Figure 4-53: WIRING LAYOUT FOR VOIP
Ethernet
Straight-Thru
Cable
LAN
AC Adaptor
(Not needed if power
supplied by LAN)
Aspire Cabinet
CPU
4VOIPU
4VOIPDB
ENTU
Aspire S Hardware Manual
Advertisement
Table of Contents
Troubleshooting
