LUNA2000-(5-30)-S0
User Manual
Figure 5-3 DC power cable connection inside the battery
After the positive and negative connectors snap into place, pull the DC input power cables
back to ensure that they are connected securely.
----End
5.2.3 Connecting Internal Signal Cables
Connecting Signal Cables Between the Power Control Module and Battery
Expansion Modules
Connect the communications terminals of the power control module and battery expansion
modules in sequence and secure them using cable clips.
Issue 01 (2020-09-18)
The DC terminals between the power control module and the battery expansion modules use the DC
connection cable (Amphenol terminal) delivered with the battery.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
49