Securing With Screws
•
When a communications terminal is connected to a single network cable, a waterproof rubber
plug must be installed. Do not install a cable with a diameter of 5 mm into a Ф7 mm rubber
plug.
•
After inserting the terminal shell into the COM port, shake the terminal shell left and right
and pull it back to ensure that it is securely installed, and tighten the nut (ensure that the
rubber plug is tightly compressed). Otherwise, the waterproof performance is affected.
4
External Electrical Connections of the Battery
Preparing Cables
4.1
2
Before connecting cables, ensure that the DC switch on the battery and all the switches
connected to the battery are set to OFF. Otherwise, the high voltage of the battery may result in
electric shocks.
12