Determining The Installation Position - Huawei LUNA2000 Series User Manual

LUNA2000-(5-30)-S0
User Manual
Type
Personal protective
equipment (PPE)

4.3 Determining the Installation Position

Basic Requirements




Installation Environment Requirements








Issue 01 (2020-09-18)
Tools and Instruments
Hydraulic pliers
Safety gloves
Safety boots
Do not install the battery in a position where it is easy to touch because the temperature
of the chassis and heat sink is high when the battery is running.
Do not install the battery in areas with flammable or explosive materials.
Do not install the battery outdoors in salt-affected areas because it may corrode and
cause fires. A salt-affected area refers to the region within 500 meters from the coast or
prone to sea breeze. The regions prone to sea breeze vary with weather conditions (such
as typhoons and monsoons) or terrains (such as dams and hills).
Do not install the battery in a position where children can touch it.
Install the battery in a dry and well-ventilated environment to ensure good heat
dissipation.
You are advised to install the battery in a sheltered place or install an awning over it.
Install the battery in a clean environment that is free from sources of strong infrared
radiation, organic solvents, and corrosive gases. Avoid exposing the battery to sunlight or
water.
The installation position must be far away from fire sources.
The installation position must be far away from water sources such as taps, sewer pipes,
and sprinklers to prevent water seepage.
The equipment must be placed on a solid and flat supporting surface.
Do not place any flammable or explosive materials around the equipment.
To prevent fire due to high temperature, ensure that the ventilation vents or heat
dissipation system are not blocked when the equipment is running.
Copyright © Huawei Technologies Co., Ltd.
Heat-shrink tubing
Safety goggles
-
4 System Installation
Heat gun
Anti-dust mask
-
34