System Power-On - Huawei LUNA2000 Series User Manual

LUNA2000-(5-30)-S0
User Manual

6.2 System Power-On

After turning on the battery switch, power on the inverter. For details about how to power on
the inverter, see the quick guide for the corresponding inverter model.
Turn on the DC switch on the battery. After the battery is installed and powered on for the
first time, the ring LED blinks for three circles. Touch the LED and observe the battery
indicator to check the running status.
LED Indicators
Table 6-2 LED indicators
Category
Running indicator
Battery system
indicator
Issue 01 (2020-09-18)
If no PV module is configured, press the black start button first.
Status (Blinking at Long
Intervals: On for 1s and then
Off for 1s; Blinking at Short
Intervals: On for 0.2s and then
Off for 0.2s)
Steady green Steady green
Blinking Blinking green
green slowly slowly
Off Off
Blinking red N/A
fast
N/A Blinking red fast
Steady red N/A
N/A Steady red
Steady red Steady red
Green after touching
Steady red
Copyright © Huawei Technologies Co., Ltd.
Description
N/A
Operating mode
Standby mode
Hibernation mode
Power control module environment alarm
Battery expansion module environment alarm
The power control module is faulty.
The battery expansion module is faulty.
Faulty
N/A
Battery level. Each bar indicates 10%.
The first three bars indicate the number of
faulty battery expansion modules.
6 System Commissioning
62