Installing Dc Input Power Cables - Huawei LUNA2000 Series User Manual

LUNA2000-(5-30)-S0
User Manual
Figure 5-7 Grounding the PE cable
----End

5.3.2 Installing DC Input Power Cables

Connect DC input power cables to the inverter
Insert the positive and negative battery connectors (Staubli) into the corresponding DC input
terminals (BAT+ and BAT–).
Step 1 Assemble DC connectors.
Issue 01 (2020-09-18)

It is recommended that silica gel or paint be used around the ground terminal after the PE cable is
connected.
The DC input terminals (BAT+ and BAT–) on the left and right sides of the battery are the same.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
53