Blomberg TGU490RX0 User Manual page 29

Troubleshooting
Laundry has shrunk, become felted or deteriorated.
• A programme suitable for the laundry type might have not been used. >>> Check the
garment tag and select a programme suitable for the fabric type.
Drum lighting does not turn on. (On models with lamp)
• Dryer might not be switched on with the On / Off / Cancel button. >>> Make sure that
the dryer is switched on.
• Bulb may have blown. >>> Call Authorized Service Agent to have the lamp replaced.
Filter Cleaning warning symbol light is on.
• Lint filter is not cleaned. >>> Clean the lint filter.
Lint Filter Cleaning symbol is flashing.
• Filter housing is clogged with lints. >>> Clean the lint filter housing.
• A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint
filter with warm water.
• Condenser may be clogged. >>> Clean the Condenser.
Water leaks from the loading door
• Lint has accumulated on the inner surfaces of the loading door and on the surfaces
of the loading door gasket. >>> Clean the inner surfaces of the loading door and the
surfaces of the loading door gasket.
Loading door opens spontaneously.
• The loading door might not be closed securely. >>> Push the loading door to close until
you hear a locking sound.
Water Tank warning symbol is on/flashing.
• Water tank may be full. >>> Drain the water tank.
• Water draining hose might be bent. >>> If the product is connected directly to a
wastewater drain, check the water drain hose.
Condenser cleaning warning symbol is flashing.
• Condenser might have not been cleaned. >>> Clean the Condenser.
A
CAUTION: If you cannot eliminate the problem although you follow the instructions
in this section, consult your dealer or the Authorized Service Agent. Never try to
repair a nonfunctional product yourself.
Dryer / User Manual
EN / 29