Huawei B2368 Series User Manual page 27

Lte cpe
Hide thumbs Also See for B2368 Series:
Table of Contents

Advertisement

LTE CPE B2368 User's
Guide
Item
service provider
The frequency band in this field is the band LTE network in the event of a successful
connection length
RSRP
SINR
FW module version This field displays the firmware version of the LTE module.
IMEI
IMSI
status interface
Interface
State
Speed
system status
runtime
Issue 01
Description
This field is the name of your Internet service provider -
This field is the name of your Internet service provider -
LTE network operators.
connection. Otherwise herein Not available.
connection. Otherwise herein Not available.
In this field the duration of LTE connectivity, and since the last
successful establishment.
In this field the signal strength RSRP LTE network by modem receives from the
transmitter or base station (sometimes referred to as an eNodeB or eNB).
In this field the strength of the signal SINR LTE network by modem receives from the
transmitter or base station (sometimes referred to as an eNodeB or eNB).
This field indicates the number of LTE mobile device (IMEI). It is a unique number
assigned by the manufacturer to identify the device.
IMSI stands for the term international mobile subscriber identity and indicates an
identifier of a SIM card. It is a unique number assigned by your mobile operator SIM
card in the mobile network.
This column is all interfaces, which has LTE modem.
This field indicates whether the LTE modem interface uses. For LTE WAN
interface in this field stated connected if the LTE modem is connected to the LTE
interface in this field stated connected if the LTE modem is connected to the LTE
interface in this field stated connected if the LTE modem is connected to the LTE
network, Disconnected Otherwise, ie when the LTE network is not available. For
network, Disconnected Otherwise, ie when the LTE network is not available. For
network, Disconnected Otherwise, ie when the LTE network is not available. For
the LAN interface is specified in this field connected if the LTE modem uses this
the LAN interface is specified in this field connected if the LTE modem uses this
the LAN interface is specified in this field connected if the LTE modem uses this
interface, and Disconnected Otherwise, ie when the network connector is not
interface, and Disconnected Otherwise, ie when the network connector is not
interface, and Disconnected Otherwise, ie when the network connector is not
connected with any device.
For WLAN is specified in this field connected if the wireless is active, Disconnected
For WLAN is specified in this field connected if the wireless is active, Disconnected
For WLAN is specified in this field connected if the wireless is active, Disconnected
For WLAN is specified in this field connected if the wireless is active, Disconnected
Otherwise, ie when wireless is disabled.
For LTE WAN interface in this field stated 4G LTE in the case of a successful connection to
For LTE WAN interface in this field stated 4G LTE in the case of a successful connection to
For LTE WAN interface in this field stated 4G LTE in the case of a successful connection to
the LTE network.
For the LAN interface is shown in this field speed Ethernet connector and a
duplex setting.
For WLAN is shown in this field the maximum transfer rate or Not available if
For WLAN is shown in this field the maximum transfer rate or Not available if
For WLAN is shown in this field the maximum transfer rate or Not available if
the wireless is disabled.
In this field the runtime LTE modem, from the last
Copyright © Huawei Technologies Co., Ltd.
3 connection status and system information
24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B2368-22B2368-66B2368-57

Table of Contents