Configuration Example Gre Vpn Tunnel Layer 2 - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
Item
Local GRE IP
address
Remote GRE IP
address
Use
back

3.14 Configuration Example GRE VPN tunnel Layer 2

This is a diagram of a network structure in the example below:
Figure 14-3 Example network structure with GRE VPN tunnel Layer 2 Figure 14-3 Example network structure with GRE VPN tunnel Layer 2
A CPE WAN IP is 172.23.40.46, which is to the LAN connected to a computer with an IP address
192.168.1.51. CPE B has a WAN IP 172.23.40.48, which is to the LAN connected computer with an IP address of 192.168.1.33. IP
addresses of both computers on the LAN must come from the same domain subnet. To configure the CPE and enter the name of
the tunnel, set the GRE layer Layer2 GER and the IP address of the server IP address of the CPE WAN B (172.23.40.48).
configuration ( Security > GRE VPN and click on Add a new tunnel) configuration ( Security > GRE VPN and click on Add a new tunnel) configuration ( Security > GRE VPN and click on Add a new tunnel) configuration ( Security > GRE VPN and click on Add a new tunnel) configuration ( Security > GRE VPN and click on Add a new tunnel)
Issue 01
Description
This is the local host IP address from which the tunnel LTE modem data stream to a
remote gateway.
This is the IP address of the remote host for a remote gateway to which LTE
modem tunnels stream.
Click this button to save your changes settings LTE modem.
Click this button to return to the previous screen without saving.
Copyright © Huawei Technologies Co., Ltd.
14 GRE VPN
103