Huawei B2368 Series User Manual page 108

LTE CPE B2368 User's
Guide
Figure 14-6 Example configuration GRE VPN tunnel Layer 3 Add a new tunnel Figure 14-6 Example configuration GRE VPN tunnel Layer 3 Add a new tunnel
Both CPE interfaces tunnel activated and assigns GRE IP address. After creating a GRE tunnel VPN Layer 3 is also
necessary to set the static routing to determine the data stream from the internet, which will be routed through the
GRE tunnel. By default, the CPE does not send any data stream via the GRE tunnel. In the example static routing
network is set to IP address
192.168.2.0/24 through the tunnel (gateway IP address: 192.168.3.2).
Figure 14-7 Example configuration GRE VPN tunnel Layer 3 static routing Add new Figure 14-7 Example configuration GRE VPN tunnel Layer 3 static routing Add new
Issue 01 Copyright © Huawei Technologies Co., Ltd.
14 GRE VPN
105