Safety And Instructional Decals - Toro ProCore Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
1. Entanglement hazard, belt—stay away from moving parts.
Do not operate the machine with the shields or guards
removed; keep the shields and guards in place.
1. Warning; thrown object hazard, bystanders—keep
bystanders away from the machine.
1. Warning; thrown object hazard, bystanders—keep
bystanders away from the machine.
2. Cutting hazard, hand and foot—wait for moving parts to
stop.
105-4586
112-4272
112-4274
1. Warning—stored energy hazard.
2. To disconnect the machine linked to an aerator, lower
processor and aerator to the ground, engage the storage
pin in the front hole and support the machine with a
jackstand, disconnect the mechanical linkage from the
aerator, disconnect the hydraulic lines, before driving away.
3. To disconnect the machine linked to a tow vehicle, lower
processor to the ground, retract the tongue, engage the
storage pin in the front hole and support the machine with a
jackstand, disconnect the mechanical linkage from the tow
vehicle, disconnect the hydraulic lines, before driving away.
1. Entanglement hazard, shaft—stay away from moving parts.
6
110-2701
112-4275