Engine Maintenance; Servicing The Air Cleaner - Toro ProCore Operator's Manual

Figure 42
Figure 43
2. Wipe grease fittings clean so foreign matter cannot
be forced into the bearing or bushing.
3. Pump grease into the bearing or bushing.
4. Wipe up excess grease.

Engine Maintenance

Servicing the Air Cleaner

Check the air cleaner housing for damage which could
cause an air leak. Replace if damaged. Check the whole
intake system for leaks, damage or loose hose clamps
Service the air cleaner filter only when the service
indicator (Figure 44) requires it. Changing the air filter
before it is necessary only increases the chance of dirt
entering the engine when the filter is removed.
1. Air cleaner indicator
Removing the Air Filters
1. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
2. Release the latches on the air cleaner and pull the air
cleaner cover off the air cleaner housing (Figure 45).
35
Figure 44